Tinkdercad - tasks - simple
Portál: | Virtuálna Univerzita Mateja Bela |
Kurz: | 3D tlač a 3D modelovanie |
Kniha: | Tinkdercad - tasks - simple |
Vytlačil(a): | Hosťovský používateľ |
Dátum: | pondelok, 20 mája 2024, 06:52 |
Opis
A collection of simple tasks in the Tinkdercad.
1. Mug
Using the Tinkercad tool, create a mug.
Dimensions:
Height: 9.5 cm.
Width: 8 cm.
The mug must also have a handle for gripping and be hollow on the inside. Create the hollow space in a way that the thickness of the mug's wall is 1 cm.
The mug mustbe a single object.
2. House
Using the Tinkercad tool, model a small house.
Use 3 objects - 2 rectangles (one for the appearance of the door) and a pyramid.
Place the door in the center of the house.
Rectangle:
Length: 25
Width: 50
Height: 30
Pyramid:
Length: 25
Width: 50
Height: 15
Door:
Length: 10
Width: 20
Height: 25
3. Gate
Using the Tinkercad tool, create a gate.
Use objects: 2 cylinders, 2 cubes, and 1 half cylinder.
Place the cylinders on the cubes, which will be spaced the length of a half-arc apart. Then, on top of the cylinders, place the half-arc.
Cylinder:
Diameter: 15
Height: 50
Cube:
a = 15
Half Cylinder:
Length: 80
Width: 15
Height: 15
4. Dice
In the Tinkercad environment, create a six-sided dice.
Add numbers 1-6 as cutouts into the cube, with a depth of 2.5.
Each number must be placed in the center of a cube face and should correspond to the arrangement on a real dice.
Cube:
a= 30
The edges of the cube must not be sharp!
5. Small palace
Using the Tinkercad tool, model a small palace according to the instructions.Use objects: 4 cylinders, 4 cones, 1 rectangle, 1 half-sphere.
- Place the rectangle in the center of the surface.
- Position a cylinder at each corner of the rectangle so that 1/3 of it overlaps with the rectangle.
- On top of each cylinder, place a cone.
- At the top of the rectangle, position a half-sphere in the center.
Rectangle:
Length: 50
Width: 50
Height: 10
Cylinder:
Radius: 10
Height: 25
Cone:
Radius: 10
Height: 15
Half-Sphere:
Radius: 45
Height: 20